TATA TISCON –

Tata Tiscon 550SD –

• Easily carries design load without any structural cracks
• Optimised design leads to reduce steel consumption
• Up to 6%^ savings on steel quantity
• More Flexibility (ductility) = More Safety
• Enhanced earthquake resistance
• Minimum UTS/YS ratio of >=1.15
• (Matching lS13920 2016 – >=1.15)
• Higher gap between YS and UTS results in higher ductility
• Minimum Total Elongation of >=16%
• (More than IS13920:2016 – >=14.5%)
• Ability to stretch more before fracture at room temperature
• Minimum Total Elongation at max force (UTS) >=5%
• More Eco-friendly

India’s First GreenPro Certified Rebar

• Our sustainable manufacturing practices have reduced the environmental impact of our rebars
• GreenPro Ecolabel enables you to make an informed and sustainable choice
• More assurance
• Ensures peace-of-mind while purchasing
• Tata Tiscon 550SD rebars are available in pieces of consistent dimensions
• Each piece is of accurate length, diameter and weight

More Reach

• 6000+ dealer network
• Free delivery* within municipal limits
• Hassle-free delivery experience
• Customer Service Engineer
• As a Tata Tiscon customer, get expert technical guidance of our Customer Service Engineers (CSEs)
• Get onsite visits and advice on material estimation, construction practices, rebar usage and other queries

Tiscon Superlinks –

Manufactured through innovative automated machinery, Tata Tiscon Superlinks are superior stirrups that save space and time at construction sites. As opposed to manually bent stirrups, readymade superlinks are highly accurate, away from bending, cracking & twisting, and ensure faster completion of work. So choose the ‘super’ solution from your dream home with Tata Tiscon Superlinks!

Tata Tiscon Superlinks have great dimensional accuracy. With no cracks, twists or bending, Tiscon Superlinks remain rigid in the face of severe force.

Manufactured using sophisticated and automated machinery, Tiscon Superlinks reduce the number of man hours needed and prevent rebar wastage. As a result, they ensure 70% faster work completion.

Superlinks are made using superior quality Tata Tiscon 550SD rebars. An automated manufacturing process also ensures correct mandel diameters and superior strength of beams and pillars.

Tata Tiscon Superlinks have superior interlocking through 65mm hook length and a 135* interlocking angle to ensure rigidity during earthquakes.

Tiscon Ultima GFX Coated Superlinks –

• Special GFX Coating – A specialised chemical coating formulation to achieve anti corrosion and rust preventive performance of Tiscon Ultima stirrups
• Graphene Biopolymers – The specialized GFX Coating formulation has been synthesized using modified natural biopolymers along with graphene.
• Enhanced Life – When exposed to Salt Spray tests, Tiscon Ultima GFX Coated Superlinks show up to an enhanced 400 hours of salt spray life.
• Accuracy – Smaller clear concrete cover and a smaller diameter make corrosion a major concern. Machine made Tiscon Ultima GFX Coated Superlinks are accurate up to 135 deg Bend & help you save labour hours and rebar wastage to manual bending.

Corrosion Resistant Superlinks

Corrosion due to salt-spray, exposure to aggressive soil and underground water seepage is a major concern for homeowners in coastal areas. Accelerated corrosion damages stirrups with time and lessens the strength of TMT rebars due to loss of rim. Tata Tiscon Ultima GFX Coated Superlinks are made with specially formulated GFX Coating that creates better bonding strength and increases the load bearing capacity of the structure’s foundation!

JSW NEO STEEL

JSW Steel TMT bars, branded as JSW Neosteel are the best quality TMT bars available in India. Manufactured from virgin iron ore in state of the art rolling mills, every single running foot of JSW Neosteel TMT bars is free from impurities and has uniform properties.

JSW NEOSTEEL is toughened high strength HYQST

(High Yield Quenched and Self Tempered) TMT Bar conforming to IS 1786:2008,

JSW Neosteel 550, JSW Neosteel 550 D and JSW Neosteel 600 and JSW Neosteel CRS

JSW Neosteel can be bent into customized shape in spite of having very high strength due to its inherent microstructure with soft ferrite and pearlite core.

Higher Corrosion

HIGHER CORROSION RESISTANCE

JSW Neosteel has higher corrosion resistance as compared to ordinary rebars due to its unique and uniform microstructure and absence of residual stresses.

Supper Siesmic

SUPERIOR SIESMIC RESISTANCE

JSW Neosteel is specially designed for earthquake prone zones and has more resistance to earthquakes and shocks due to combination of higher strength and ductility. Its high UTS/ YS ratio of 1.15 minimum ensures higher energy absorption capacity.

Higher Fatigue

HIGHER FATIGUE RESISTANCE

JSW Neosteel is excellent in cyclic loading situations due to uniform & critically designed rib pattern.

PATHWAY TO PERFECTION

Because of partial quenching, a part of the original heat remains in the core of the steel and on the cooling bed, this migrates towards the surface and results in an automatic self tempering process where the surface layer of martensite is tempered. The resulting tempered-martensite shows improved deformability compared to as quenched martensite

JSW Neosteel 550 D

High Strength TMT re-bars from JSW Steel

• JSW Neosteel EDS
• Extra Ductile & High Strength TMT re-bars
• JSW Neosteel 600
• Ultra High Strength TMT re-bars for selective applications
• JSW Neosteel CRS
• Corrosion resistant TMT re-bars in various grades
• JSW Neosteel Fastbuild
• Cut & Bend TMT bars in customized shapes & sizes
• JSW Neostrands
• Low Relaxation Prestressed Concrete Strands (LRPC) from JSW Steel

KALIKA STEEL

BILLETS -‘

Modern chemical analysis equipment

We use modern chemical analysis equipment to test and record the chemical composition of our billets. This helps us find whether the steel has required chemical properties or not.

German-made Spectrometer for quick and accurate analysis

Time is critical. To ensure timely deliveries without compromising quality, we use a Spectrometer that helps in fast, accurate, and reliable quality checks.

Automatic mould level control in caster

We use automatic mould level control to maintain an appropriate formulation and consistent distribution of mould flux.

Billet macro analysis for internal structure control

Macro analysis is performed on the billets to evaluate the quality and consistency of the internal structure.

TMT BARS – 

We Offer TMT Bars of the Following Cross Sections:

8mm, 10mm, 12mm, 16mm, 20mm, 25mm, 32mm, 36mm, 40mm

We Offer Dowel Bars of the Following Cross Sections:

32mm, 36mm

Chemical Composition

• To conform to IS 2831:2012, a thorough chemical analysis of every cast or lot of billets is carried out in our chemical and spectro lab. The billets thus tested are then moved for rolling.

Quality Control Measures Adopted

• Modern Chemical Analysis Equipment.
• German made Spectrometer for Quick and Accurate Analysis.
• Automatic Mould Level Control in Caster.
• Billet Micro Analysis for Internal Structure Control.

Documentation

• All the documents are maintained as per BIS and ISO norms.
• After all these material test, it is followed by Tagging, Packing and Forwarding.

UMA STEEL –

UMA 550 TMT Bars –

UMA 500 TMT Bars has uniform high strength throughout length of the bar due to proper quenching (TMT).

Earthquake Resistance

UMA 500 TMT Bars have high fatigue resistance to Dynamic/ Seismic loads due to its higher ductility quality. This makes UMA bars most suitable for use in earthquake-prone areas.

Cost Effective

UMA 500 TMT Bars require 15%-20% less usage than ordinary bars for the same work with 5% more cost. This results in an overall saving of 10%-15%.

Weldability

UMA 500 TMT Bars have high fatigue resistance to Dynamic/ Seismic loads due to its higher ductility quality. This makes UMA bars most suitable for use in earthquake-prone areas.

Bendability

UMA 500 TMT Bars has uniform ductility(Elongation) which gives excellent bendability.

Strain Ageing

Due to Unique scientific manufacturing process and chemical composition, UMA bars show no tendency of brittleness either during welding or during cold deformation of welded joints.

Strong Bonding

Uniform & precise rib pattern (CNC Notch Cutting Machine) result in better bonding strength with concrete & hence longer life of structure.

Form Ability

Due to very high-speed continuous rolling mill design, UMA 500 TMT Bars provide high ductility & high strength throughout the length of bars and excellent workability and durability.

Fire Resistance

No effect of fire & heat on quality parameters of UMA 500 TMT Bars up to 600 degree Celsius because of QST (TMT) technique.

Corrosion Resistance

Prevent the formation of coarse carbides by controlled water cooling (TMT) which is the main cause of corrosion of all common bars. No surface stresses which resist the corrosion of bars.

Customized Product

UMA 500 TMT Bars provides as per requirement of client Designed.

MS BILLETS

We procure high quality sponge iron/DRI. The material is stored in our 15000 Sq. Ft. Raw Material Yard. The quality of this material is an important factor in producing high quality MS Billets that result in the best TMX Steel Bars.

The magnetic crane feeds the sponge iron to a furnace. Along with sponge iron, we also feed end cuts of finished steel bars. And iron for making molten metal The furnace melts the fed iron.

The molten lava is then checked for ideal chemical composition with the help of state-of-the-art Spectro Meter and C&S Apparatus.

The molten lava then goes to the coreless-induction furnace, in which the impurities are sifted to the top. The induction furnace then tilts and pours away the impure liquid, hence achieving the first step towards high quality MS Billets.

During the next step, micro-alloying elements are added to the refined metal to achieve ideal composition. During this process the metal is repeatedly tested for the chemical composition and appropriate steps are taken until it reaches a satisfactory state. The purer the Mild Steel Billets, the better will be the quality of Steel Bars

The metal is then poured into a ladle to purge it of excessive non-metallic elements. This is done by passing nitrogen through a porous plug.

Now the material is ready to be cast. The liquid metal is fed to a Continuous Casting Set-up, through which it is molded into long, rectangular MS Billets. As the molded metal begins to cool down, it is sprayed with air-mist (a combination of air and water) to achieve quick solidification.

Finally the long casts are cut into MS Billets of following sizes as per the requirement:

100 X 100 Sq. Mm. 110 X 110 Sq. Mm. 160 X 160 Sq. Mm.  125 X 125 Sq. Mm

GAJAKESARI STEEL – TMT BARS 

8mm | 10mm | 12mm | 16mm | 20mm | 25mm | 32mm

Enhanced strength with durability ,Best in class Rib Pattern  ,Earthquake resistant,Easy Weldability ,Low carbon content,Easy Bendability ,Higher Fatigue resistance  ,Made with ISI standards